\n

Note: Actual sizes vary based on transformer cooling type (oil\/dry), protection devices, access doors, and enclosure design.\n\n\n\n\n

---

\n\n\n\n

Enclosure Options and Impact on Size\n\n\n\n

The outer enclosure or housing of the compact substation plays a key role in determining the total size:\n\n\n\n

1.Metal Sheet Enclosure (Mild Steel\/GI Painted)\n\n\n\n

\n
• Compact and cost-effective\n\n\n\n
• Suitable for moderate environments\n\n\n\n
• Approximate size: 4.5m x 2.0m x 2.3m\n\n\n\n\n

  2.Stainless Steel or Galvanized Housing\n\n\n\n

  \n
  • Designed for harsh or coastal environments\n\n\n\n
  • Anti-corrosion\n\n\n\n
  • Slightly thicker walls increase footprint\n\n\n\n\n

    3.Concrete Housing (Prefabricated Kiosk)\n\n\n\n

    \n
    • Best for vandal-prone or fire-sensitive areas\n\n\n\n
    • Bulkier and heavier\n\n\n\n
    • Approximate size: 6.0m x 2.2m x 2.5m\n\n\n\n\n

      \n\n\n\n

      ---

      \n\n\n\n

      \ud83d\udccf Transformer Size Within the Substation\n\n\n\n

      The1000 kVA transformer is the heaviest and largest internal component. Its size impacts the transformer compartment:\n\n\n\n

      Transformer Type	Length x Width x Height (mm)	Weight (Approx.)
      Oil-Immersed	2200 x 1500 x 1800	2000\u20132500 kg
      Dry-Type Cast Resin	1800 x 1300 x 1700	1800\u20132200 kg\n\n\n\n \n\n\n\n \ud83d\uddfa\ufe0f Layout Configurations\n\n\n\n There are three common layout configurations for a 1000 kVA compact substation:\n\n\n\n \ud83d\udd39 Inline Layout\n\n\n\n HV \u2192 Transformer \u2192 LV in a straight line (popular, narrow footprint)\n\n\n\n \ud83d\udd39 L-Shape Layout\n\n\n\n Transformer in the corner, HV and LV on perpendicular sides (space optimization)\n\n\n\n \ud83d\udd39 U-Shape Layout\n\n\n\n HV and LV panels on each end, transformer in center (ideal for 3-door access)\n\n\n\n \n\n\n\n \ud83d\udce6 Foundation and Installation Space Requirements\n\n\n\n While the compact substation is pre-fabricated, it still requires:\n\n\n\n \n Aflat concrete plinth 200\u2013300 mm above ground\n\n\n\n Clearance of 1.2\u20131.5 meters around doors for maintenance\n\n\n\n Cable trenches beneath or beside the unit\n\n\n\n Space forventilation and oil containment (for oil-immersed units)\n\n\n\n\n \n Typical site area needed:8 to 12 square meters (minimum)\n\n\n\n\n \n\n\n\n \ud83d\udd10 Clearance Standards & Safety Zones\n\n\n\n To comply with IEC\/IEEE\/GB safety regulations:\n\n\n\n Area Minimum Clearance Front of Access Doors 1500 mm Rear and Side Panels 1000 mm HV Incoming Cable Termination 1200 mm Air Flow \/ Ventilation Zone 1000 mm\n\n\n\n \n\n\n\n Design Tips from PINEELE\n\n\n\n \n Usemodular design to save space in urban zones\n\n\n\n Opt fordry-typetransformers for indoor or fire-sensitive areas\n\n\n\n Selectside-entry cable routing to reduce trench requirements\n\n\n\n Confirmtransport size restrictions for delivery access\n\n\n\n Allow forfuture expansion space if growth is expected\n\n\n\n\n \n\n\n\n Application Areas Where Size Matters\n\n\n\n \n City centers and urban infrastructure\n\n\n\n Underground or rooftop substations\n\n\n\n Renewable energy systems (solar\/wind)\n\n\n\n Industrial parks with space limitations\n\n\n\n Temporary or mobile power setups\n\n\n\n\n \n\n\n\n Why PINEELE?\n\n\n\n PINEELE specializes in:\n\n\n\n \n Standard and custom compact substation designs\n\n\n\n Precise layout drawings (DWG\/PDF)\n\n\n\n Turnkey delivery, installation, and testing\n\n\n\n Full IEC, ANSI, and GB compliance\n\n\n\n Remote monitoring integration and SCADA-ready units\n\n\n\n\n \ud83d\udce7 Contact:[email protected] \ud83d\udcde Phone: +86-18968823915 \ud83d\udcac Chat with us on WhatsApp\n\n\n\n \n\n\n\n \u2753 Frequently Asked Questions (FAQs)\n\n\n\n Q1: Can a 1000 kVA compact substation fit in a 5×3 meter area?\n\n\n\n A: Yes, standard metal enclosures with inline layout can be installed in such space, with minor clearance adjustments.\n\n\n\n Q2: Is it possible to install this substation indoors?\n\n\n\n A: Yes, especially with dry-type transformers and adequate ventilation. PINEELE offers indoor-rated enclosures.\n\n\n\n Q3: What is the weight of a fully assembled 1000 kVA substation?\n\n\n\n A: Approximately 4.5 to 6 tons, depending on transformer type and materials used.\n\n\n\n \n\n\n\n \u2705 Conclusion\n\n\n\n Understanding thephysical size and layout of a 1000 kVA compact substation is essential for site planning, installation, and long-term maintenance. PINEELE provides highly optimized, space-efficient, and standards-compliant solutions to meet a wide range of application needs.\n\n\n\n \u201cEngineered to Fit \u2014 Built to Power: PINEELE Compact Substations.\u201d\n\n\n\n \n","protected":false},"excerpt":{"rendered":" \ud83d\udcd8 Introduction to 1000 kVA Compact Substation Size A 1000 kVA compact substation is a prefabricated, fully integrated solution that combines high-voltage switchgear, transformer, and low-voltage switchgear into one enclosure. One of the most critical aspects of planning for such a substation is understanding its physical size, footprint, layout, and space requirements. In this guide, […]\n","protected":false},"author":1,"featured_media":586,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[26],"tags":[],"class_list":["post-585","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"acf":[],"yoast_head":"\n