Factory Price 10000va LED Digital AVR Automatic Voltage Stabilizer

The relay type voltage stabilizer achieves voltage stabilization through relay switch control. Its working principle is based on voltage feedback and load regulation.The stabilizer circuit consists of an input terminal,an output terminal,and a voltage feedback loop. The voltage feedback loop continuously monitors the output voltage. When the detected voltage exceeds or falls below the preset value, the feedback signal controls the switching state of the relay, adjusting the connection or disconnection of the current path to maintain a stable output voltage.

TECHNICAL PARAMETERS

Malli		TKB-500VA~10000VA
Phase		Single phase
Input voltage		AC 45-260V, 80-260V, 100-260V, 140-260V (or customized)
Output voltage		AC 220V or customized
Taajuus		50Hz/60Hz
Precision		±10% or customized
Efficiency		>95%
Control type		Relay type
Digital display		Show input and output voltage,Load Ratio and Fault Indicator
Protection		Over temperature, Overvoltage, Undervoltage, Overload, Time delay
Ambient temperature		-10°C~+ 40°C
Relative Humidity		<95%
Waveform Distortion		No additional wave form distortion
Insulating Resistance		Normally more than 2MΩ
Insulating Class		Class B
Protection	Overvoltage	Output Voltage ≥ 245V ± 4V
	Low voltage	Output Voltage ≤ 180V ± 4V
	Over temperature	95℃±10℃
	Delay time	Long time(180 second) / short time(6 second)
	Undervoltage	Disabled by default, customizable if needed
Power		1000VA	2000VA	3000VA	5000VA	8000VA	10000VA
Size(mm) LWH		30520085	30520085	370250105	370250105	335120440	335120440
N.W(kg)		3.9	4.34	6.34	8.3	8.92	16.35
The size and weight vary depending on the voltage range, and are subject to the customized actual product.

Send An inquiry

Are you struggling to find the right supplier and quality products? Fill out the form and send it to us now; you’ll receive exactly what you need within 24 hours!